Surface Preparation

Delaminator™

• A water-based, biodegradable, low odor and a user-friendly coating remover safe for indoor or outdoor use.
• Effective for lifting a variety of paints and coatings from concrete, metal, masonry, wood, and stone.
• Will remove acrylic, urethane, epoxy, and latex coatings.
• Particularly useful when mechanical coating removal is prohibitive or ineffective.
• Non-flammable.
• Available in 1-gallon (3.8L) and 5-gallon (19L) pails.
• One gallon (3.8L) covers 60-100 square feet (1.5 to 2.4 m²/L)

T1000™ Primer

• A bonding agent which provides enhanced adhesion, workability and curing of cementitious overlays.
• Packaged in a 1-gallon (3.8L) plastic bottles of concentrate, dilute 1 gallon of primer with 1 gallon of water.
• At diluted strength the coverage is approximately 400 square feet per gallon, but varies with surface conditions. A second application is recommended.
• Required bonding agent for use with T1000™ Stampable Overlay, T1000™ Fine Overlay, and Cantera™ Vertical Overlay.

CHO™ Cleaner

• A citric acid based cleaner required for washing substrate prior to staining with Elements™ Transparent Stain.
• Opens the pores of the concrete surface to ensure proper penetration.
• Extremely effective for removing efflorescence and other organic stains from the surface of concrete.
• Packaged in 1 pound (.5 kg) and 5 pound (2.3 kg) units, the concentrated powder must be mixed with water prior to use.
• Can be used to aid in removal of release agent.

Grit Rotary Brush

• An aggressive brush for wet cleaning concrete and opening up hard troweled concrete surfaces.
• Excellent for use in prepping slabs for both acid stain and water-based stain applications.
• With its self-replenishing silicon carbide impregnated nylon bristles, this brush will outlast floor pads over 100 - 1.
• 15" and 18" brushes are available to fit on most low speed 17" and 20" machines.

Available Sizes & Product Numbers:

• 15" - EGRB15
• 18" - EGRB18