Decorative Concrete Overlay 1
Decorative Concrete Overlay 1
Decorative Concrete Overlay 1
Decorative Concrete Overlay 1
Decorative Concrete Overlay Frame

Decorative Concrete Overlay

For Interior or Exterior Concrete Surfaces

Decorative concrete overlays give new life to structurally sound, worn existing concrete surfaces. Butterfield Color® has engineered a number of concrete overlay systems to provide the precise blend to transform blemished concrete into a fresh canvas to achieve any imagined decorative concrete look. Whether you simply desire a consistent uniform color , a contemporary concrete stain appearance or are looking to obtain a natural stone texture or pattern , Butterfield Color® offers a complete system with fully compatible products and tools. A concrete seal is recommended to protect the decorative surface.


T1000™ Stampable Overlay

MT Resurfacer™

  • A polymer modified micro-topping that mixes with water.
  • Create an abrasion resistant surface ideal for restoring worn or color blemished concrete.
  • Apply with squeegee trowel or standard trowel
  • Available in two grades: Base Coat and Finish Coat, each grade available in cement gray or white.
  • Application thickness range: Base Coat 1/16”-1/8” (1.6mm-3.2mm), Finish Coat 1/32” to 1/16” (.8mm-1.6mm)
  • Approximate coverage: Base coat is 96 ft2 (8.9 m2) per 25 pound (11.3 kg) bag applied at 1/16" (1.6 mm) thickness; Finish coat is 96 ft2 (8.9 m2) per 25 pound (11.3 kg) bag applied at 1/16" (1.6 mm) thickness.
  • May be integrally colored with Uni-Mix® Color Packs  or stained after 72 hours of curing time by applying Perma-Cast® Sierra Stain™  or Elements™ Transparent Stain
T1000™ Stampable Overlay

T1000™ Stampable Overlay

  • Packaged in 55-pound (25 kg) bags. Each bag, when properly mixed with water, provides for approximately 24 SF at 1/4” thick (2.2m² at 6 mm thick).
  • A polymer modified, cementitious material designed for resurfacing and texturing stable, non-moving concrete floors and hardscapes.
  • Single application thickness can range from 1/8" (3mm) to a maximum of 1/2" (13mm), depending on thickness desired.
  • Use with T1000™ Primer to provide enhanced adhesion and workability of the material.
  • Wide range of Uni-Mix® Color Packs available. Available in Cement Gray and Cement White
  • Compatible with Butterfield Color® release agents , stamping tools , stencils or stains .
T1000™ Fine Overlay

T1000™ Fine Overlay

  • Packaged in 55-pound (25 kg) bags. Each bag, once properly mixed with water, provides a coverage rate of approximately 96 SF at 1/16" thick (2.2m² at 1.5 mm thick).
  • A polymer modified, cementitious material designed for resurfacing and texturing stable, non-moving concrete floors and hardscapes.
  • Single application thickness can range from 1/16" (1.5mm) to a maximum of 3/16" (4.5mm), depending on thickness desired.
  • Use with T1000™ Primer to provide enhanced adhesion and workability of the material.
  • Wide range of Uni-Mix® Color Packs available.
  • Multiple applications methods possible, smooth trowel, broom finish, splatter brush, or sprayed with a hopper gun.
  • Compatible with Butterfield Color® stencils or stains .
  • Available in both Cement Gray and Cement White.
Patch Mix

Uni-Mix® Color Packs

T1000™ Primer

T1000™ Primer

  • A bonding agent which provides enhanced adhension, workability and curing of cementitous overlays.
  • Packaged in 1-gallon (3.8L) plastic bottles of concentrate, dilute 1 gallon of primer with 1 gallon of water.
  • At diluted strength the coverage is approximately 400 square feet per gallon, but varies with surface conditions. A second application is recommended.
  • Required bonding agent for use with T1000™ Stampable Overlay, Microcem, T1000™ Fine Overlay , and Cantera™ Vertical Overlay.
Micro-Cem™ Ultra-Thin Overlay

Micro-Cem™ Ultra-Thin Overlay and Polymer

  • A precise blend of finely ground minerals, cement, and polymer, which allow for ultra-thin applications.
  • A two component system that blends a pre-packaged dry material with liquid polymer at the jobsite to create a topping for resurfacing existing concrete floors, walls, and exterior hardscapes.
  • One 55-pound (24.94kg) bag combined with 5 quarts (4.73L) of polymer yields approximately: 96 SF at 1/16" thick
  • Application thickness for Micro-Cem™ ranges from 1/16 inch (1.5mm) to a maximum of 3/16 inch (4.5mm). Control the material thickness with the Micro-Cem™ Gauge Roller.
  • T-1000 Primer is required as the bonding agent for Micro-cem.
  • An ideal system to restore worn or color blemished concrete, or correcting construction errors when a smooth hard trowel finish is desired.
  • Freeze/thaw resistant and develops a 28-day compressive strength of 5,800 psi (40.4 Mpa)
  • May be integrally colored with Uni-Mix® Color Packs or stained after 72 hours of curing time by applying Perma-Cast® Sierra Stain™ or Elements™ Transparent Stain

800-282-3388

Nationwide Distribution

Decorative Concrete Products

© Butterfield Color - Decorative Concrete Products - Site Map
Aurora, IL Web Design by Idea

American Society of Concrete ContractorsNational Professional Association of ArchitectsThe Construction Specifications InstituteAmerican Society of Landscape Architects